This type of cable converts a plug-in sensor to an adhesive one, which allows the fan speed to be automatically controlled by the iMac system management controller. Please be aware that Micron is not responsible for the contents of the above website, and does not assume any legal liability for the products or information offered at this site. The website link is provided for informational purposes and for the convenience of our customers.Īn alternative solution is to purchase an aftermarket sensor adapter. A link to SMCFanControl can be found here. This allows the user full control of the fan speed to set it to an acceptable level. One solution is to use a third-party software such as SMCFanControl. You will probably want to reduce the speed of the fan, as well as the noise. One of the benefits of SSDs is that they generate significantly less heat in comparison to a traditional HDD, so the increased fan speed is unnecessary. Please note that any iMac that uses a ‘sticky pad’ sensor can simply be re-attached to the new SSD and fan speed is unaffected. When you power on your iMac, the temperature will incorrectly register as much higher than normal and the fan speed will increase as a result. Solid state drives (SSDs) and the accompanying 2.5” to 3.5” converter bracket do not use this type of socket, meaning that the cable cannot be reattached. Some earlier iMacs systems use a separate plug-in temperature sensor cable, which attaches to a socket on the original hard disk drive (HDD) to determine the drive temperature and adjust the fan speed accordingly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |